SAGEM ITD62 FRDTT receiverMain specificationsQuick guided installation 7-day Electronic Programme Guide (EPG) Favorite channels lists Parental control and receiver lock DVB subtitles and TeletextConnectorsAudio stereo output 2 SCARTV1 – 04/12/2008Hardware specificationsTransmission standards DVB-T, MPEG-2, OFDM COFDM modes: 2k and 8k supported Support: SFN RF Input/Output Sagem Itd 58 manual Input connector: IEC 169-2 Female RF input frequency range: UHF 470-862 MHz Sagem Dvr 64250 Sl T Sw manual (8 MHz BW) VHF 174-222 MHz (8 MHz BW) COFDM bandwidth: 8 MHz Output connector: IEC 169-2 Male Loop-through output frequency range: 47-862 MHz Video decoder MPEG-2 (ISO/IEC 13818-2) Profile level: MP@ ML Aspect Ratio: 4:3 and 16:9 Video resolution: 720×576, 704×576, 544×576, 480×576, 352×576, 352×288 Conversion: Pan / Scan, Letter box Resizing: down/up (1/4, 1/16) Audio decoder CD ISO/IEC 13818-3 compliant Modes: mono, stereo, joint stereo A/V Inputs/Outputs TV SCART RVB, CVBS, audio stereo AUX SCART RVB input, CVBS, Y/C output, audio stereo Power supply AC in: 220-240 V ~50 Hz DC out: 12 V 700 mA Power consumption* Consumption max.: 11 W Consumption in stand-by: 9.5 W Front panel 1 LED indicator IR sensor: 38 KHz Rear panel 1 x IEC female Sagem Itd 63 manual (RF input) 1 x IEC male (RF loop-through) 2 x SCART (TV, AUX) Physical specifications Receiver Colour: cool grey / dark grey Dimensions (WxDxH): 220 x 135 x 35 mm Weight: ~400 g Operating temperature: +5 to +40 C C Carton box Total weight (packed): ~1.4 kg Dimensions (WxDxH): 247 x 236 x 80 mm Storage temperature: -25 to +65 C C Accessories 33 keys remote control (operating range up to 7 m) Batteries: 2 x 1.5 V (AA – LR06) User manual SCART lead External AC/DC power supply (EU plug) Receiver installation Quick guided installation Automatic channel search Main features Multilingual user interface Subtitles language preferences 7 favorite channels lists Parental control (according to CSA morality level) Receiver and channel locks Sagem Itd 70b 7-day Electronic Programme Guide (EPG) ** Subtitles and Teletext ** Compatibility with Canal+ analogue receiver Record the broadcasted programme on VCR or DVD recorder* Measured according to the EN 62087 Standard ** If broadcastSAGEM COMMUNICATIONS Digital Set Top Box Business Unit Headquarters: Le Ponant de Paris 27, rue Leblanc – 75015 Paris – France www.sagem-communications.comAll rights reserved – The information and specifications included are subject to change without prior notice – Sagem Communications tries to ensure that all information in this document is correct, but

D-1-20nserial interfaceparallel interfaceIf you have a suitable shielded cable, you should be able to connect the printer immediately. If you have one of the few computers that requires a different type of interface, you need to use an optional interface card. See Chapter 6.Follow the steps below to connect a parallel or serial interface cable to the printer. 1. Make sure both the printer and computer are turned off. 2. Open the rear cover by grasping it on each side and pulling down.D-1-21-An3. Plug the cable connector securely into the printers parallel or serial interface connector.serial interface parallel interface D-1-21-B4. If you are connecting the parallel interface, squeeze the wire clips together until they lock in place on either side of the connector. If your cable has a ground wire, connect it to the printers Epson Dfx 8500 ground connector as shown below.D-1-22-AIf you are connecting the serial interface, fasten the screws on the cable connector. (If your cable has a ground wire, connect it to the printers ground connector as shown above.)D-1-22-BNote: If the screws that come with the cable do not fit into the connector lock nuts on the interface, replace the lock nuts with the optional lock nuts provided with the printer.5. Open the plastic clamp to the right or left of the interface connectors by pulling out its top tab. Insert the cable in the plastic clamp and close the clamp, as shown below.D-1-23-A6. Close the rear cover.D-1-23BnCaution: Always close the rear cover before using the printer.7. Plug the other end of the cable into the computer. (If there is Epson Lq 630s manual a ground wire at the computer end of the cable, attach it to the ground connector at the back of the computer.) Before using the printers serial interface, you need to select serial communication by changing the printers DIP switch settings. You may also need to change two other serial interface settings, serial baud rate and parity, before your printer and computer can communicate properly. See Using DIP Switches in Chapter 4 for more information._______ _______ Epson Pm A840 manual _______ _______Chapter 2 Pass 4For Windows 95 Users. Installing the printer driver using My Computer Installing the printer driver using plug-and-play Accessing the printer driver. Changing the printer driver settings. For Windows 3.1 Users. Installing the printer driver. Accessing the printer driver. Changing the printer driver settings For Windows NT 4.0 Users. Installing the printer driver. Accessing the printer driver. Changing the printer driver settings For Windows NT 3.5x Users. Installing the printer driver. Accessing the printer driver. Changing the printer driver settings. 2-2 2-3 2-4 2-5 2-6 2-8 2-8 2-9 2-11 2-12 2-12 2-13 2-15 2-16 2-16 2-17 2-19 2-21 Epson Stylus C62 manual 2-21 For DOS Program Users. Installing the printer driver.The EPSON printer software that comes with your printer includes the printer driver software, plus a status monitor utility and paper memory utility for use with Windows 95. A printer driver is software that allows your computer to control the printer. You need to install the printer driver so your software applications can take full advantage of the printers capabilities. See the appropriate section below for installing the printer software for your version of Windows (or DOS):For Windows 95, see the next section. For Windows 3.1, see page 2-8. For Windows NT 4.0, see page 2-12. For Windows NT 3.5x, see page 2-16. For DOS programs, see Epson Stylus Photo R2880 manual page 2-21.Note: Before you install the printer software, it is a good idea to make backup copies of the EPSON printer software disks.For Windows 95 UsersFollow the steps below to install the printer driver for Windows 95. For instructions on installing the EPSON Status Monitor 2 utility, see Chapter 5.Installing the printer driver using My Computer1. Make sure Windows 95 is running and the printer is off. 2. Insert Disk 1 of your printer driver software in a disk drive. Double-click the My Computer icon, and then double-click the drive in which you inserted the disk. 3. Double-click the Setup.exe icon, then select your printer icon in the EPSON Printer Driver Setup dialog box shown below. Click OK and follow the on-screen instructions.setupnAfter you install your printer driver for Windows 95, you can install the EPSON Status Monitor 2 utility program. This utility monitors the status of your printer, alerts you when errors occur, and provides you with troubleshooting tips. See Chapter 5 for instructions on installing the Status Monitor.Installing the printer driver using plug-and-playIf your comput

FACSIMILE EQUIPMENTPARTS REFERENCE LIST MODEL: MFC215C / 425CN / 620CN FAX2440C DCP115C / 116C / 117C DCP120C / 315CN(For Germany / United Kingdom / France / Belgium / Netherlands / Switzerland / Ireland / Denmark / Austria / Spain / Italy / Portugal / China / Singapore / Gulf / Russia / Oceania (Australia / New Zealand) / Pan-Nordic (Norway / Finland / Sweden) / Iberia (Spain / Portugal) / Euro Generic)Copyright Brother 2005 All rights reserved No part of this publication may be reproduced in any form or by any means without permission in writing from the publisher. Specifications are subject to change without prior notice.NOTES FOR USING THIS PARTS REFERENCE LIST1. In the case of ordering parts, it needs mentioning the following items: (1) Code (2) Q’ ty (3) Description (4) Recommend (The mark is attached to recommend parts at this column.) (5) Symbol (PCB No., Revision, and Parts location mounted on the PCB.) Note: No orders without Parts Code or Tool No. can be accepted. [Example] (1)REF.NO. CODEDESCRIPTIONRECOMMENDSYMBOL REMARKSDesign-changed parts: When the parts are changed, any one of the following symbols is mentioned in the REMARKS column. CHG (chg): The part is changed to a new part. ADD (add): The part is newly added. DEL (del): The part is deleted. Symbol in capital letters indicates that the change is the latest one in the page. Models in this parts reference list have the character Z at the end of model name. However, this "Z" does not appear after a model Brother Pt 65 manual name when it is written Brother Pt 2200 manual on the control panel of the actual product. The Brother Pt 25 manual difference between the new and Brother P Touch Xl manual old Brother Dcp 120c manual model can be determined by the character Z written on the Rating Label affixed to the back of the product. New models have the "Z", old models do not. The image at the right shows the label of a new model. Therefore, if there is the character Z in the label, use this parts reference list. Parts change will be informed by the technical information.COUNTRIESGERMAN —– GER UNITED KINGDOM —– UK FRANCE —- FRA BELGIUM —- BEL NETHERLANDS —- NLD SWITZERLAND —- CHE IRELAND —- IRE DENMARK —- DEN AUSTRIA —- AUS SPAIN —- SPA ITALY —- Brother Dcp 115c ITA CHINA —- CHN SINGAPORE —- SIN GULF —- GUL RUSSIA —- RUS